Dromida 1/18 Rally Car RTR FPV w/Camera/Goggles/Monitor
This is the Electric Powered, Radio Controlled, 1/18 Scale Ready to Run FPV Rally Car with Camera from Dromida. *600TVL FPV Video Camera* **25mW 40-Channel 5 Band 5.8GHz Video Transmitter** **Tactic FPV-RM2 40-channel, 5.8GHz FPV** monitor with 4.3" LCD and Micro Memory Card Port **Tactic FPV-G1 Goggles** FEATURES: Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor (TACZ5152) with 4.3" (109mm) LCD and micro memory card port* and sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included) *memory card port accepts up to 32GB memory card, not included Video Transmitter: 25mW 40-channel, 5-band 5.8GHz Camera: Factory Installed 600TVL FPV Goggles: Tactic FPV-G1 Goggles (TACZ5200) Chassis: Plastic construction with countersunk screw holes Drive: Four wheel shaft Differentials: Bevel gear type Motor: Factory-installed Torque 370 motor with aluminum mount Radio: Tactic D100 2-channel with RE-18 waterproof receiver and speed control, and DS100 waterproof steering servo with servo saver for precise steering control, steering and throttle trims and dual rates, servo reversing LEDs for monitoring power levels Rally Car Battery: 6-cell, 1300mAh NiMH Battery Charger: USB for NiMH battery Body: Printed and decaled molded polycarbonate Shocks: Plastic body, oil-filled, new shorter design for better control Shock Towers: Composite plastic Tires: High-grip rubber Front Bumper: Foam Ball Bearings: Full set included INCLUDES: RTR FPV Rally Car with Camera, Transmitter, Monitor, Goggles, LiPo Battery for Monitor, NiMH Battery for Car, Motor, Radio System, USB NiMH Charger, Sun Shield, Trimmed Body, Micro USB Charge Lead, 4 AA Batteries for Transmitter, Instruction Manual REQUIRES: Track and Maintenance Equipment SPECS: Length: 10.9" (277mm) Width: 5.1" (130mm) Height: 4.25" (108mm) Weight w/Battery: 1.3lb (590g) Wheelbase: 6.7" (170mm) COMMENTS: For increased speed Dromida offers a Brushless Conversion Kit (DIDC1152) that includes a 5300Kv Brushless Motor, 25A ESC, and other upgraded components. The Dromida 2S 7.4V 1600mAh battery (DIDC1134) is recommended for best results and highest speed with this conversion kit. **Do not use a LiPo battery with the stock ESC. The stock ESC does not have Low Voltage Cutoff, and will damage the LiPo battery. COMMENTS: For replacement or to upgrade to ball bearings use: Qty. Size Location Qty. Bearing Set 4 8x12mm Fr Uprights 2 DIDC1071 4 8x12mm Rear Uprights 2 DIDC1071 2 8x12mm Fr Diff 1 DIDC1071 2 8x12mm Rear Diff 1 DIDC1071 1 8x12mm Spur Gear 1 DIDC1071 1 6x10mm Spur Gear 1 DIDC1070 1 6x10mm Driveshaft 1 DIDC1070 jxs 07/14/17 ir/jxs BOX DIMENSIONS: 13.00" W. X 7.50" H. X 17.00" L. BOX WEIGHT: 5.84 LBS.
We Also Recommend