Cart 0
1/18 LaTrax Teton -

1/18 LaTrax Teton

  • 15994

This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 scale, Ready to Run LaTrax Teton Monster Truck from Traxxas. FEATURES: Chassis: Molded composite nylon monocoque Drive: Four wheel, steel center driveshaft Differentials: Hardened steel bevel gear Radio: 2.4GHz with 2-channel micro receiver, waterproof steering servo, and all weather electronics that allow driving through puddles, ice, slush, and more Electronic Speed Control: Fully proportional forward, brake, reverse, programmbale with three drive profiles, Sport, Race and Training Mode, two-stage low-voltage detection for optional LiPo battery Motor: 370 size brushed Battery: 2/3A 6-cell, 7.2V, 1200mAh NiMH, with Standard connector Battery Charger: 2A DC powered Suspension: Fully independent Shocks: Oil filled plastic body, coil over Body: ProGraphix Fully painted with decals applied Steering: Two bellcranks on chassis to multiply the speed of the servo, and provide precise geometry for the steering angle of each wheel Ball Bearings: Full set included Front and Rear Bumpers: Plastic Tires: Rubber, off-road tread Wheels: Five spoke 1.63" (41mm) diameter INCLUDES: RTR LaTrax Teton Monster Truck, with Motor, 2.4GHz Radio, ESC, NiMH Battery, Charger, 4 AA Batteries, Instruction Manual, 10T Pinion Gear, 60T Spur Gear SPECS: Vehicle; Length: 10.16" (258mm) Front Track: 4.17" (106mm) Rear Track: 4.23" (107.5mm) Weight: 19.2oz (55g) with battery Weight: 13.3oz (43g) without battery Height: 4.65" (118mm) Wheelbase: 6.44" (163.5mm) Shock Length: 2.36" (60mm) Ground Clearance: 1.18" (30mm) Internal Gear Ratio: 2.5:1 Overall Drive Ratio: 15:1 stock Battery Tray Dimensions: 4 x 1.4 x 0.71" (102 x 35 x 18mm) Body; Length: 9.4" (239mm) Width: 3.6" (91mm) Height: 3.3" (84mm) COMMENTS: Available in the following body colors; Blue, TRAC50BB Orange, TRAC50NN Green, TRAC50GG Red, TRAC50RR If replacement ball bearings are needed, Traxxas offers the 7541X, Latrax Ball Bearing Set TRAC9804, that replaces all of the ball bearings. jxs 12/16/14 ir/jxs BOX DIMENSIONS: 8.50" W. X 3.66" H. X 8.75" L. BOX WEIGHT: 11.63 LBS.

We Also Recommend