Cart 0
Dromida 1/18 Rally Car RTR FPV w/Camera/Goggles/Monitor

Dromida 1/18 Rally Car RTR FPV w/Camera/Goggles/Monitor

  • 22999

   This is the Electric Powered, Radio Controlled, 1/18 Scale            
             Ready to Run FPV Rally Car with Camera from Dromida.              
                          *600TVL FPV Video Camera*                            
             **25mW 40-Channel 5 Band 5.8GHz Video Transmitter**               
                  **Tactic FPV-RM2 40-channel, 5.8GHz FPV**                    
               monitor with 4.3" LCD and Micro Memory Card Port                
                          **Tactic FPV-G1 Goggles**                            
FEATURES: Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor         
            (TACZ5152) with 4.3" (109mm) LCD and micro memory card port* and   
            sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included)     
            *memory card port accepts up to 32GB memory card, not included     
          Video Transmitter: 25mW 40-channel, 5-band 5.8GHz                    
          Camera: Factory Installed 600TVL FPV                                 
          Goggles: Tactic FPV-G1 Goggles (TACZ5200)                            
          Chassis: Plastic construction with countersunk screw holes           
          Drive: Four wheel shaft                                              
          Differentials: Bevel gear type                                       
          Motor: Factory-installed Torque 370 motor with aluminum mount        
          Radio: Tactic D100 2-channel with RE-18 waterproof receiver and      
            speed control, and DS100 waterproof steering servo with servo saver
            for precise steering control, steering and throttle trims and dual 
            rates, servo reversing LEDs for monitoring power levels            
          Rally Car Battery: 6-cell, 1300mAh NiMH                              
          Battery Charger: USB for NiMH battery                                
          Body: Printed and decaled molded polycarbonate                       
          Shocks: Plastic body, oil-filled, new shorter design for better      
          Shock Towers: Composite plastic                                      
          Tires: High-grip rubber                                              
          Front Bumper: Foam                                                   
          Ball Bearings: Full set included                                     
INCLUDES: RTR FPV Rally Car with Camera, Transmitter, Monitor, Goggles, LiPo   
            Battery for Monitor, NiMH Battery for Car, Motor, Radio System,    
            USB NiMH Charger, Sun Shield, Trimmed Body, Micro USB Charge Lead, 
            4 AA Batteries for Transmitter, Instruction Manual                 
REQUIRES: Track and Maintenance Equipment                                      
SPECS:    Length: 10.9" (277mm)                                                
          Width: 5.1" (130mm)                                                  
          Height: 4.25" (108mm)                                                
          Weight w/Battery: 1.3lb (590g)                                       
          Wheelbase: 6.7" (170mm)                                              
COMMENTS: For increased speed Dromida offers a Brushless Conversion Kit        
           (DIDC1152) that includes a 5300Kv Brushless Motor, 25A ESC, and     
           other upgraded components. The Dromida 2S 7.4V 1600mAh battery      
           (DIDC1134) is recommended for best results and highest speed with   
           this conversion kit.                                                
         **Do not use a LiPo battery with the stock ESC. The stock ESC does    
           not have Low Voltage Cutoff, and will damage the LiPo battery.      
COMMENTS:   For replacement or to upgrade to ball bearings use:                
           Qty.    Size    Location        Qty.        Bearing Set             
            4     8x12mm  Fr Uprights       2            DIDC1071              
            4     8x12mm  Rear Uprights     2            DIDC1071              
            2     8x12mm  Fr Diff           1            DIDC1071              
            2     8x12mm  Rear Diff         1            DIDC1071              
            1     8x12mm  Spur Gear         1            DIDC1071              
            1     6x10mm  Spur Gear         1            DIDC1070              
            1     6x10mm  Driveshaft        1            DIDC1070              
                                                                   jxs 07/14/17
BOX DIMENSIONS:   13.00" W. X   7.50" H. X  17.00" L.
BOX WEIGHT:    5.84 LBS.

We Also Recommend